this post was submitted on 11 Feb 2024
9 points (100.0% liked)

ErgoMechKeyboards

5827 readers
6 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

founded 1 year ago
MODERATORS
 

Hey all, working on a Corne Choc, and having issues flashing the right half of the board with QMK Toolbox.

I am getting a validating error with:

822 invalid byte in program region, 0 outside region

This is the second controller as I had the same error on the first and assumed I ruined it when I was troubleshooting it and desoldering.

Ordered a new board and same issue.

I've cleared the EEPROM, there are not shorts or bad solder on the headers. This is a completely separate PCB.

Tried using QMK MSYS to reflash ISP (not sure I got that right, don't really understand it).

Get a blue led indicating power, reset button works to put it into bootloader mode, still nothing will flash on it.

Unfortunately on the first go round I had soldered headers to swap but was too tall for me, desoldered the boards and went directly to the PCB, as mentioned this is a new board on a new PCB, did not program prior to soldering.

top 2 comments
sorted by: hot top controversial new old
[–] [email protected] 2 points 8 months ago (1 children)

Which board are you using?

[–] [email protected] 1 points 8 months ago

I am using Elite C's.