techsupport

2449 readers

5 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Software gore

Recommendations

founded 1 year ago

MODERATORS

[email protected]

Can RAM degrade after a reinsertion? (feddit.it)

submitted 4 weeks ago by [email protected] to c/[email protected]

16 comments fedilink hide all child comments

I got a really weird problem.

Two years ago bought a set of 4x DDR4 3200 16gb each, single sided and placed them in a ryzen 5600 desktop computer, which i almost never turned it off. It worked without issue.

This weekend I wanted to dust off the PC, so I took all the components out, replaced the thermal paste and so on.

Turned on the PC again, worked apparently without issues until after a while Linux was pissed about going out of memory. Out of memory? With 64gb of RAM? I checked with dmidecode -t memory and I saw that a channel was reporting completely empty.

Shut down the PC, reinserted the second channel, rebooted, saw 64gb. One hour later, kernel panic. Rebooted in memtest86+, error in memory. What? Removed one module, error. Removed two modules, no error. Switched the modules, no error. What??

Placed the two modules that are passing the test in another computer, error. Put back in the original computer, pass test. AAAAAAAAAAAAAAA

Now I downclocked from 3200 to 2400 and everything seems working fine.

What could be? Have I been cursed?

After a few reinsertions do the slots degrade to a point that can't sustain 3200 anymore?

you are viewing a single comment's thread
view the rest of the comments

[–] [email protected] 1 points 4 weeks ago* (last edited 4 weeks ago)

i put the new thermal stuff only on the cpu, specifically that new honeywell material. It's a bit smaller than the cpu, ordered 3x3 cm measuring a core i3 that i had on hand, while the ryzen has a bigger IHS and fits better with a 4x4 cm

i'm thinking maybe i tightened the cooler too much but it's the OEM one, so it shouldn't allow overtightening because has the stoppers on the threads... unless the honeywell pad is too thick for that