113
eFuels pilot plant in Chile officially opened : wind energy enable the nearly CO~2~-neutral operation of petrol engines
(lemmy.world)
20/12/2022
Porsche and international partners working with the Chilean operating company Highly Innovative Fuels (HIF) have started the industrial production of synthetic fuels.
https://newsroom.porsche.com/en/2022/company/porsche-highly-innovative-fuels-hif-opening-efuels-pilot-plant-haru-oni-chile-synthetic-fuels-30732.html
Electrofuel : great potential here I believe.
More here : https://en.m.wikipedia.org/wiki/Electrofuel
The more interesting approach is synmethanol, particularly via electrosynthesis. Only half of energy density of gasoline, and suitable for fuel cells, including DMFCs.
Methanol or ammonia, both are good
Haber-Bosch for fertilizer, Fischer-Tropsch for synfuel.
But, really, we need something with mild conditions and preferably something directly electrosynthesis driven. Large potential for improvement in both.
I mean ammonia is pretty decent fuel in itself, it can be decomposed to hydrogen or burned as is
The Haber-Bosch approach to breaking the nitrogen triple bond takes a lot of energy in terms of high pressure and temperature which is not present in the product, hence wasted. Ammonia is a fertilizer either as gas or as ammonium nitrate, and too precious to burn.
Another random fact: half of the combustion enthalpy present in liquid hydrogen has been spent on its liquification.
And also, you don't need to use Fisher-Tropsch process either. Methanol is good enough fuel that you can get more directly from syngas and getting fractions of hydrocarbons this way is simply wasteful (tar formation, too light products etc). Additional benefit is easier conversion back to hydrogen if need be
That is, unless energy density is critical. I don't think that difference matters in most of the cases
No. Haber-Bosch process is very mature by now and it doesn't take much more energy than thermodynamically necessary to do so. You get there by recycling heat and reusing energy of compressed gases. The actual problem is getting that hydrogen in the first place
If you want to use hydrogen as a fuel anyway, you can add that little overhead and get fuel that you can either burn in ICE or go the whole nine yards, crack it back into elements and put that in fuel cells, and, more importantly, this comes with massive advantage of ammonia being about as easy to liquefy as propane, and we already have propane fuelled cars. Energy density is vastly higher than hydrogen this way, less than propane, sure, but it's something
Another option is dimethyl ether, but this thing needs to take carbon from somewhere, just like methanol
Direct methanol fuel cells (DMFCs) still have low power densities ... so maybe we should look at molten carbonate fuel cells or simple heat engines ? Anyway, synmethanol looks great !