I have recently setup a system with TrueNAS scale and while it's been mostly smooth sailing (lies), I can't figure out why TrueNAS itself cannot connect to virtual machines and vice versa, which kinda sucks for me as I have a wireguard server setup on a virtual machine, which works but clients connecting to it cannot connect to anything hosted on the host itself...
(And the whole reason I have wireguard setup like this is because I couldn't figure out how to setup the wg-quick app, it just refuses to work for unknown to me reasons... and by "work" I mean that the WG clients just cannot connect to it, the webui itself works).
The VMs are set with Virtio as their NIC and truenas itself is set to a static IP and can connect to everything else...
Any help would be appreciated...
[SOLUTION]
This is gonna be a quick overview on how to fix this issue, as it seems to be fairly common. You can find more detailed instructions here: https://forum.level1techs.com/t/truenas-scale-ultimate-home-setup-incl-tailscale/186444
Scroll down to the section titled “Oh but wait”
Note: This problem cannot be fixed through neither the webui, web shell, nor SSH, you need to have physical access to the machine, a display adapter and a monitor to display the TUI on.
-
From the cli menu, go to "Configure network interfaces"
-
Remove DHCP/Any other static alias you have on your main interface by either pressing delete on it or by manually going to it and deleting it, just leave the alias field blank and ipv4_dhcp to "No", then click on Save
-
Create a new interface by bressing "n", select type 'BRIDGE", set name to "br0" (without the quotes) and either enable DHCP or add the IP alias that you previously removed from your main interface as an alias here and click on Save
-
Back on the main "Configure network interfaces screen" press "a" to save changes, then "p" to make them permanent (again without the quotes).
-
At this point, your network should drop out and you shouldn't be able to connect to the WebUI. Reboot the system and everything should work properly again!
-
That's it! Problem solved. Now you should go and change the NICs of the VMs to use the new br0 and they should able to connect to the truenas host just fine.
This guide explains what's going on and how to fix it. Scroll down to the section titled "Oh no but wait"
https://forum.level1techs.com/t/truenas-scale-ultimate-home-setup-incl-tailscale/186444
Here's the corresponding video
https://youtu.be/R7BXEuKjJ0k?si=TvTONP3tbsCQeU5X
Yep, that fixed it, tysm, adding a solved flag and a few quick steps on fixing it for anyone else who might have the same problem, as it does seem to be a common issue with truenas